The selection of composite multi-layer solid wood or moisture-proof board is suitable for home environments with relatively high environmental requirements, practicality, and long service life. Friends who are economically feasible can consider it as the best choice.
Hexiang board is mainly made from broken crop straw as the main raw material, with MDI glue and functional additives applied, and produced under high temperature and high pressure. It is not only flat and smooth, with a uniform and symmetrical structure, and a solid board surface, but also has good dimensional stability, high strength, environmental protection, flame retardancy, and weather resistance. It also has excellent processing and surface decoration properties, suitable for various surface decoration treatments and mechanical processing, especially for processing irregular edges Compared with particleboard, it has obvious advantages.
Composite solid wood, moisture-proof board, and solid wood unpainted board: both moisture-proof and environmentally friendly, with high cost-effectiveness. The national cabinet products have undergone more than ten years of development, and the experience of more than ten years is sufficient to determine that moisture-proof boards for wardrobes are the best choice. The moisture-proof boards for cabinets can be used in severely humid environments, indicating their high quality. Due to the brittleness of the board surface, higher requirements are placed on production equipment. The walls of the new home have been decorated and painted, and there will be a small amount of moisture on the walls. After the installation of the overall wardrobe, it cannot be ventilated, so the back panel of the wardrobe needs to be made of more moisture-proof boards. The moisture-proof board is soaked in water, and due to the presence of long wooden fibers and green moisture-proof agent, it will no longer expand after soaking to a certain extent. Therefore, it is reasonable for most brands of cabinets to use moisture-proof board as the main material for the cabinet body.
Regular manufacturers produce particleboard and MDF: particleboard produced from the same material is more environmentally friendly than MDF. The truth is simple: molded wood does not require glue, and environmental protection is definitely not a problem. If the amount of glue used for cutting into 1 piece and 5 pieces is different, the less glue used, the more environmentally friendly. MDF, also known as MDF, is formed by pressing wood powder, which has better flatness and is more suitable for engraving, milling, and molding. It is usually used for shaping door panels, such as baking paint and molding (vacuum forming). The medium fiber board material is softer and less prone to edge bursting during edge sealing, making it easier to process. Therefore, many small factories use medium fiber. In terms of moisture resistance, particleboard has much poorer moisture resistance compared to moisture-proof boards. Without green core moisture-proof agents, if exposed to a humid environment for a long time, the wood is prone to mold and decay. The raw material of MDF is wood powder. Soaking MDF in water will cause it to expand like a cake.